The Roadmaster Exact Center Steering Stabilizer # RM47MR is the stabilizer you need for your 2022 Thor Freedom Elite 22FE. This includes the custom mounting brackets for attaching to your Ford E-350 cutaway chassis. view full answer...
The Roadmaster # RM-195125 Spare Tire Carrier can handle tires mounted on wheels up to 16-1/2 inches in diameter and bolt circles up to 7 inches. The carrier can handle wheels/tires weighing up to 200 lbs.
To see if it'll work in the hitch on your motorhome, you'll need to measure to see how far the hitch is recessed under the bumper. Measure from the center of the hitch pin hole rearward until you clear the furthest rearward point of the back bumper. If this distance is less than 5 inches,... view full answer...
The Air Lift LoadLifter 5000 Ultimate Air Helper Springs part # AL88138 which is a fit for your 2018 Thor Freedom Elite 22FE Motorhome on a Ford E-350 chassis mounts inside the leaf spring pack so there is not going to be any tire to frame clearance issues. This kit however will require drilling. For a similar system that does not require drilling I recommend the SumoSprings Maxim Custom Helper Springs part # SSR-106-47-1. view full answer...
You would be fine using two of the MaxxAir Fans part # MA00-07500K without remote interference in the motorhome. The remotes require a clear line of sight from the remote to operate the fan so the remote in the bed room wouldn't activate the fan in the front of the motor home.
I recommend to use Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White part # 344270KITW to install the vents. view full answer...
The correct set of SumoSprings Solo Custom Helper Springs for your 2018 Thor Freedom Elite 26HE on a Ford E-350 Chassis is indeed part # SSF-106-40 for the front and part # SSR-130-47 for the rear. The SumoSprings will not raise the height of your Thor Freedom Elite at all. They will simply act as a buffer between the frame and contact point to provide stability and additional support. The SumoSprings are a very popular upgrade for your Thor Freedom Elite and well worth the cost. view full answer...
From what I was able to find in my research it looks like the 2017 Thor Freedom Elite 30FE is 32'-2" long, and there is not a Class C cover that is designed for 32-34 foot coaches. With that said, the Classic Accessories # 052963795639 will fit on your Thor Freedom Elite since they're designed to have a little bit of extra length in them to accommodate for rear ladders and air conditioners on the roof; this will provide the necessary length to make it work on your coach. This cover will... view full answer...
I have an option with less of an angle but there is not an option that is perfectly vertical besides the Roadmaster Spare Tire carrier part # RM-195125 like you mentioned. However, the Draw-Tite Spare tire carrier option part # 6715 has less of an angle compared to the Curt. It is also angled out instead of in so the tire is angled dramatically upwards like with the Curt option. I have attached photos so that you can compare the two carriers. The Draw-tite has a universal bolt pattern which... view full answer...
To improve the ride quality in your 2014 Thor Freedom Elite motorhome I recommend the SumoSprings Maxim Custom Helper Springs - Rear Axle Item # SSR-106-47-1 and the SumoSprings Solo Custom Helper Springs - Front Axle Item # SSF-106-47. Both kits will improve ride quality by absorbing road shock and reducing body roll. As one is being stretched the other is being compressed and is pushing to return each back to it's normal state which reduced body roll. Both are constructed of a microcellular... view full answer...
I checked with Roadmaster for you, and verified that there is a rear anti-sway bar that fits your 2021 Thor Freedom Elite on a Chevy 3500 cutaway chassis, though there is not a front anti-sway bar that fits. The correct part number for the rear bar is the following:
- Roadmaster Rear Anti-Sway Bar # RM-1109-175
A rear anti-sway bar like # RM-1109-175 is the best way to enhance the ride of your motorhome because it acts as a brace between the frame of your motorhome, and is constructed... view full answer...
The Surco, # SP502L is a universal mount ladder so yes this will be able to mount to your 2019 Thor Freedom Elite Motorhome. However, like all exterior RV ladders it will require a backing to be in place for proper mounting. I suggest you verify that your Motorhome was built with this in place before attempting installation. You will need to locate a stud or bulkhead for a solid attachment point. The best option is to contact the OEM to inquire where is best location to install. view full answer...
I checked with SumoSprings and they recommend the black springs, so the SumoSprings Solo Custom Helper Springs part # SSF-106-47 for the front and the SumoSprings Maxim Custom Helper Springs part # SSR-106-47-1 or the SumoSprings Solo Custom Helper Springs part # SSR-130-47 for the rear on a 2022 Thor Freedom Elite with Ford E-450 Chassis.
Please note, if you have lines or anything on the outside of the frame, above the leaf springs where the Maxim will mount, you'll need to go with the Solo. view full answer...
The rear anti-sway bar we offer for the Thor Freedom Elite Class C motorhome based on the Ford E-450 V10 chassis is Roadmaster part # RM-1139-147. This 1-1/2-inch diameter bar replaces the factory sway bar. This kit fits the E-450 chassis from 1997 on. We no longer offer the Blue Ox kit you referenced. view full answer...
We have two entry door lock options that can be keyless. I have listed them below, along with the cut-out dimensions that they fit. Unfortunately, your RV information does not tell me what size cut-out that you have, so you will want to verify that before ordering.
- Global Link Ultra E Pro Electronic Lock for Travel Trailer # 295-000183
cut-out size: 3-3/4" tall x 2-3/4" wide
- Global Link RV Entry Door Locking Latch Kit # GL55VR
cut-out size: 3-3/4" tall x 2-3/4" wide
This option has... view full answer...
The Lippert High-Speed Power Stabilizer Jack - 30" Lift # LC337199 are typically used for trailers, but if your motorhome has enough clearance and you have access to the frame then you could potentially use this stabilizer.
The mounting holes for the # LC337199 are 68-11/16" from center-hole to center-hole so you'll need to ensure that the frame lines up with these holes.
If not, you could use a stabilizer like the Ultra-Fab Power Twin II Electric Stabilizer # UF39-941705, which can... view full answer...
We don't currently offer a bike rack that would able to slide over the hitch on your motorhome and allow you to still flat tow your car, but we do offer bike racks that are rated for use on the back of a flat towed vehicle if yours currently has a trailer hitch. The Saris SuperClamp EX Bike Rack for 2 Bikes # SA4025F you were looking at has a wheel-mount design and is rated for use on flat towed vehicles. It can fit both 1-1/4" and 2" trailer hitch receivers and has a 60lb per bike capacity.... view full answer...
Go To Results